3 Easy Steps to Fix a Clogged Kitchen Sink

3 Easy Steps to Fix a Clogged Kitchen Sink

You are hurriedly washing your utensils in the sink, only to realize a problem. The water in the bowl is moving slower than usual. You are stuck with dirty utensils.

Worse is that you cannot leave the apparatus and go on with another chore. But wait, do not call the plumber just yet.

There are so many easy steps that you can perform to unclog it. These steps will be very affordable and quick to implement. Well, you can consider hiring a plumber in Fairfax or make it your own project and fix it with these simple steps below.

Why Has My Kitchen sink clogged?

The first thing is to identify why your sink has clogged. The information will help in choosing which method to use. Some of the reasons why kitchen sinks sometimes get blocked include:

  • Food Particles

Food particles left on the plate may enter the Kitchen pipe when you are washing the utensils. The food particles will accumulate, creating a blockage and prevent water from passing through.

  • Grease

This is one of the major substances that causes clogging. Grease will attract food particles into forming the particular blockage that stops water from flowing.

  • Hair

You might be washing the utensils when all of a sudden, you pull your hair back, only for some hair to fall in the sink. The hair will accumulate, just like the food particles and grease, and eventually block the drainage.

  • Any Small Objects

There is a reason why children stay away from kitchen premises. Not only are there tools that can harm the child, but also the child may cause harm in the kitchen. Accidentally, a child may place small objects inside the bowl. These small objects, such as toys, will block the passage. Read more here  https://dengarden.com/home-improvement/Why-Drains-get-Clogged-and-how-to-Prevent-it-Happening .

How To Unclog A Kitchen Sink

  1. Use Boiling Water

This method is perfect for a sink clogged with food particles and grease. The hot water dissolves the unwanted materials, hence freeing the passage.

To use this method, observe the steps below:

  • Boil water on a kettle or a stove (The recommended measurement is half a gallon)
  • Direct the boiled water into the opening hole.
  • Wait for about a minute, then open your faucet. Check if it drains well.

NB: This method is not suitable for PVC Pipes. The high temperature will melt and damage them.

  1. Break It Down With Vinegar And Baking Soda

So, you have poured in the Boiling water, yet your sink is not back to normal. There is a high chance that the elements within the pipes need chemicals to break them down. Home chemicals might be expensive, but there is a natural alternative.

Simply,

  • Remove all the water and visible debris from the bowl. (Make sure that the bowl is empty before you start the process)
  • Using a spoon, pour a cup of baking soda into the draining hole. (If you do not have a spoon, you can use a Spatula)
  • Immediately, add one cup of vinegar into the draining hole as well.
  • Then, cover the draining hole.
  • Wait for about 15 minutes. Then uncover the draining hole.
  • Finally, pour hot water into the draining hole for effective use.
  1. Cleaning the P-Trap

If the above two methods have not been successful, then you can clean the P-Trap. It is the most effective method to use. The P-Trap is the elbow-shaped pipe right below your sink.

The principal function of the P-Trap is to trap unwanted materials from the bowl. Therefore, if the drain is blocked, then there is a high chance the P-trap is full of dirt materials.

First, you will need to disassemble the pipe. Ensure that you have protective gear such as gloves, towel and goggles as the process may turn out very messy.

Once you are ready, follow the procedure below:

  1. Below the P-Trap, put a bucket to collect any material that may fall out during the process.
  2. The curved pipe is held both horizontally and vertically to the drain conduit. Carefully unscrew its connectors to separate the P-Trap from the duct. The connectors will be at the ends of the P-Trap.
  • After the P-Trap is on its own, carefully remove all the dirt inside. (You may pour water through it to make sure that it is clean) .
  1. Place it back into the conduit after cleaning, then check if the drainage is working well.
  2. Plunge Away The Blockage

The P-trap cleaning method may turn out to be a little tiring. But, if you have a plunger, it might save you some energy. Follow the steps below.

  1. Pour in hot water into the sink until it is halfway filled.
  2. Direct the plunger into the hole then constantly, pump it up and down for a few minutes.
  • Stop the pumping, then check if the sink is draining normally.
  1. If it isn’t then, continue until it does.

Preventive Measures To Avoid Clogging

The hard truth is that a clogged sink is not pleasant. If you had found a way to prevent it from happening, most definitely, you would have taken it. Click here to see more tips.

Below are some steps that might be of help:

  • Ensure that you store all the grease in a container rather than pouring it into the draining hole. Eventually, all you will need to do is dispose of the container once it is full.

 

  • Occasionally, drain hot water into the drainage. It is recommended that you do this about twice a week. It will stop the food particles and grease from accumulating inside the. Hence, there will be few future clogs.

 

  • Use a drain strainer to filter the food out from the draining hole. This is suitable if you do not have a garbage disposal.

 

  • Seek to avoid the usage of chemical products to get rid of the blockage. These chemical products may cause more harm than good such as corroding your pipe. A corroded pipe will not function at all. (Use the natural alternatives that have been outlined above)

Where necessary, make sure that you consult or hire a professional plumber to avoid damaging the plumbing system.

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

error: Content is DMCA protected !